EASYSEAL Sandstone Seal+ENHAN 5LT

Product Information

In most cases, one can will seal systems that have lost all refrigerant in as little as seven days and is designed for large systems up to 5 tons. For systems 1.5 tons to fractional, use A/C EasySeal-SS. For commercial systems with refrigerant charge of 125 lbs. – 250 lbs., use A/C EasySeal-XL. This vapour control layer has been designed for use on habitable buildings, meaning it is compatible with structures that see a lot of residential use. This product is ideal for use on a range of different flat roof projects, with porches, garages and extensions just some of the structures this roof can be used on effectively.

Attach other end of charging hose to low side service port. As this is done, there will be a very small release of system charge that will purge air from the hose. Incredibly easy to apply to your roof, the installation process can be carried out by DIY enthusiasts and professional builders alike IKO EasySeal roofing membranes should be installed generally in accordance with BS 8217: 2005, ‘Code of Practice for Reinforced bitumen membranes for roofing’ and IKO fixing instructions. EasySeal roofing is applied as a two-layer system, bonded by the removal of the release film on the reverse of the product, in accordance with the detailed 'Step by Step' fixing instructions available from IKO.Surfaces should be clean, dry and free from mould, debris, algae and efflorescence before applying to the sandstone A minimum of 3 months should be left after the installation of a new driveway or patio before sealing to ensure that any efflorescence or staining has had time to dissipate Next Day products are available across most of the UK, however, restrictions apply in certain areas postcode area:

For those who need to install roofing membranes, but want to avoid the hassle and experience requirements that ‘torch-on’ methods such as hot bitumen or use of naked flames usually bring with them, the BBA approved IKOR Easyseal self-adhesive roofing system is absolutely for you. An extremely versatile product guaranteeing an excellent performance on any flat roof it is applied to, this excellent product is made up of a polyester reinforced aluminium core and a bitumen coating.NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Ultimate to service port and inject refrigerant through injector into system while charging. Run system continuously for a minimum of 1 hour to allow product to fully circulate through system. With a two-layer system, Easyseal systems are ideal for smaller roofing applications, including porches, garages, extensions and dormer windows. They are also usable on larger-scale applications due to the easy no-fire installations as per IKO's 'Step by Step' fixing instructions.